 |
 |
 |
|
Aja D10CEA SDI to Analog Audio/Video converter The D10CEA converts SDI video with embedded audio to component or composite analog video and 4 Channel balanced analog audio. The video outputs can be configured as YPbPr (Betacam or SMPTE/EBU-N10), RGB, composite or YC (S-Video). The analog audio outputs can be wired in a balanced or unbalanced configuration. The 4 audio channels can be selected from group 1-4. Audio and video output connections are available on a 25 pin "D" subminiature connector (breakout cable supplied). All video/audio configuration is done by external dipswitch selection. This versatile, low-cost, miniature monitoring solution also outputs two re-clocked loop-thru SDI outputs.
Specifications
Inputs
| SDI (SMPTE 259M) w/Embedded Audio, 1x BNC |
Outputs
| Video: YPbPr - SMPTE, EBU-N10, Betacam, RGB, NTSC, PAL, YC (S-Video) |
| Audio: 4 Channel Balanced/Unbalanced |
| Video/Audio Outputs on 25 Pin D Connector |
| 2 SDI Re-Clocked Loop-Thru, 2x BNC |
Frequency Response
| Video, +/- .25dB to 5Mhz, Audio, +/- .5dB to 20Khz |
User Controls
| External Dipswitch |
| Video Format |
| Pedestal |
| H/V Blanking |
| Audio Group 1 - 4 |
Audio Level (adjustable via switch selection):
S/N A15212 and above: +24, +18, +15, +12 dBu
S/N below A15212: -14, 0, +2, +4 dBu |
Power
Size
5.8" x 3.1" x 1" (147 x 79 x 25mm)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Digital to Analog Audio and Video Converter
SDI with Embedded Audio Input
Component or Composite Video Outputs
4 Channel Balanced Audio Output
2 Re-Clocked, Loop-Thru SDI Outputs
Selectable Audio Channel Pair/Group
|
|
|
|
|
|
|
|
| Accessories for this product... |
|
|
|
|
