 |
 |
 |
|
Aja HD10C2 HDTV Serial Digital to Component Converter The HD10C2, AJA's second generation HD D/A converter, brings exciting new features. In addition to being a high-quality 10-bit HD converter, the HD10C2 is "dual-rate" and works with both HD-SDI and SDI inputs. For HD-SDI inputs, the HD10C2 outputs full bandwidth HD component or VGA-style RGBHV video. For SDI inputs, component or composite SD outputs are supported. When connected to a multi-format monitor like the Sony 20L5, the HD10C2 will automatically provide an image from almost any HD or SD input format. The HD10C2 also features 2 equalized HD-SDI outputs.
Specifications
Formats
| HD: 1080i @ 50/59.94/60 Hz |
| 1035i @ 50/50.94/60 Hz |
| 1080psf @ 23.98/24/25/29.97/30 (displayed as Interlaced) |
| 720p @ 59.94/60 Hz |
| SD: 525 59.94Hz, 625 50Hz |
| Automatic Configuration |
Inputs
| HD-SDI or SDI SMPTE 259/292/296, 10-bit, BNC |
| Input Equalization: 125 Meter 1694 Cable |
Outputs
| HD: YPbPr, RGB (SMPTE-274) |
| SD: YPbPr (SMPTE/N10, Beta® RGB, Y/C, NTSC/PAL) |
| 13W3 wideband analog output connector (cable supplied) |
| HD-SDI/SDI equalized loop-thru, 2 x BNC |
Sync
| HD: Tri-level or Bi-level, H/V Drive |
| SD: normal SD sync |
Frequency Response
| HD: Y +0, -.5db to 30 MHz, C +/- .25db to 13 MHz |
| SD: Y +/- .25db to 5.5 MHz, C +/- .25db to 2.5 MHz |
User Controls
| External Dipswitch |
| YPbPr/RGB |
| Component/Composite (SD) |
| SD Pedestal |
| SD Blanking |
| HD 4:3 Graticule |
| SD NTSC/NTSC-J |
| Sync on Video on/off |
Power
Size
5.8" x 3.1" x 1" (147 x 79 x 25mm)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Low Cost, High Quality, 10-bit Dual Rate HD/SD D/A Conversion
Full Bandwidth HD Analog RGB or YPbPr Output (HD input)
Component/Composite SD Output (SD input)
2 Equalized Loop-Thru HD-SDI/SDI Outputs
RGBHV VGA style HD output using supplied adapter
HD Sync Selectable Between Bi-level and Tri-Level
4:3 Safe Area Graticule (HD)
5-18VDC Power
External Dipswitch Configuration
|
|
|
|
|
|
|
|
| Accessories for this product... |
|
|
|
|
