Type
Multi-format HDTV/SDTV LCD monitor
Screen Size
Type 17 wide format
Aspect Ratio
16:9
LCD Panel
17" wide, active matrix TFT
Effective Screen Size (W x H)
372.9 x 209.7. mm (14-11/16" x 8-1/4")
Pixels
1366 x 768 (W-XGA)
Display Colours
16.77 million
Viewing Angle
Horizontal
178°
Vertical
Brightness
350 cd/m2
Contrast Ratio
900: 1
Response Time (G to G)
Rise time 8ms / Decay time 9ms (TYP)
Horizontal/Vertical
31.469 kHz to 75.000 kHz
Frequency (PC signals)
48 Hz - 65 Hz
Depending on the signal within the range of these
frequencies, some signals may not be displayable in which case, "Out of range " is shown.
Applicable Standard
3G SDI (Ready) : SMPTE424M/SMPTE425M
DUAL LINK HD SDI (Ready) : SMPTE372M
HD SDI: BTA S-004C, SMPTE292M
SD SDI: ITU-R BT.656: 525/625, SMPTE259M: 525
EMBEDDED AUDIO: SMPTE299M, SMPTE272M
Audio Output
Internal:1.0 W + 1.0 W (L/R)
Environmental Conditions
Operating temperature
5°C to 35°C (41°F to 95°F)
Operating humidity
20% to 80% (non condensing)
Storage temperature
-20°C to 60°C (-4°F to 140°F)
Power Requirements
AC 120/220-240V, 50/60 Hz/DC 12 – 17 V
Rated Current
1.2 A (AC 120 V) / 0.8 A (AC 220 – 240 V)
5.0 A (DC 12 – 17 V)
With desktop stand
430 x 349.8 x 199 mm (17" x 13-7/8" x 7-7/8")
Without stand
430 x 309 x 102 mm (17" x 12-1/4" x 4-1/8")
Weight
Including stand
8.6 kg (18.9 lbs.)
Excluding stand
6.8 kg (15.0 lbs.)
Provided Accessories
AC power cord, power cord holder, screw x 2 ( for power cord holder), Ferrite core x 1 ( for external battery)
Video
HD/SD SDI (IN1)
Digital signal input (compatible with EMBEDDED AUDIO/
HD/SD SDI (IN2)
DUAL LINK): Auto detection, 2 line, BNC x 2
HD/SD SDI (OUT)
Digital signal output
(compatible with EMBEDDED AUDIO)
1 line (switched out), BNC connector x 1
DVI-D (HDCP)
DVI-D signal input (compatible with HDCP):
DVI-D connector x 1 (compatible with DDC2B)
COMPO.
Analogue component signal
(Y, PB/B-Y, PR/R-Y)
input/output: 1 line, BNC x 6
Video signal: Y: 1 V (p-p), 75 ohms,
PB/B-Y, PR/R-Y: 0.7 V (p-p), 75 ohms
* The input (IN) and output (OUT) terminals are bridgeconnected
(auto termination)
VIDEO
Composite video signal input/output: 1 line,
BNC x 2, 1 V (p-p), 75 ohms
(IN and OUT are connected with a bridge connection)
Audio
AUDIO IN
Analogue audio signal input:
1 line, RCA x 2, 500 mV (rms), high impedance
AUDIO MONITOR OUT
Analogue audio signal output: 1 line, RCA x 2, 500 mV (rms)
External Control
MAKE/TRIGGER
RJ-45 x1 (8-pin)
RS-485
RJ-45 x2 (IN/OUT)(8-pin)
RS-232C
D-sub(9-pin) x1
Note: Waveform and Vectorscope cannot be displayed simultaneously.